Discover our machinery for olive oil
DM-120
PACKER OF
OIL
The DM-120 packaging machine is a very specific machine for packaging oils and at the same time very versatile, as they allow the use of containers of different capacities, shapes or materials.
More information
The DM-120 packaging machine is a very specific machine for packaging oils and at the same time very versatile, since they allow the use of containers of different capacities (from 0.005 liters to 10 litres, shapes or materials (plastic, glass or cans). The amount to be packaged can be programmed, both in liters and in kilos, in a few seconds, although in any case, the filling control is electronic by weight (by weight).In this way, and as a liter of oil weighs 916 grams, regardless of the temperature at which it is found, very high precision is achieved, impossible to achieve with other systems, without proceeding to thermostat the oil, the containers and the bottling plant very precisely. of having different viscosities.As this system checks after each dosage the quantity actually packaged, the microprocessor that it incorporates automatically makes corrections in successive packaging (the machine learns e of its small errors), achieving in this way, precisions not achieved to date. They incorporate all models of totalizers and partial counters for litres, kilos and containers, with which the packaging control is absolute. Its exclusive anti-drip system improves precision if possible and avoids the classic problem of dirty containers. Its installation is very simple, since it does not need compressed air or aerial deposits. Its connection to the single-phase network and its union by means of a flexible sanitary pipe, to the supply tank, is sufficient. Constructed entirely of AISI 304 stainless steel. Constant speed, low speed centrifugal pump with stainless steel impeller and quick disassembly. Flow stop solenoid valve and pipes
according to the law. For all these reasons, they are very suitable for medium or small packers.
M-3
STAINLESS OLIVE
MILL
The M-3 stainless steel mill is designed to grind olives with maximum precision and to extract more pulp, obtaining a perfect mass for use in the MG-707 fat and acidity meter.
More information
The “M-3” mill is designed to grind olives, obtaining a perfect mass for use in the MG-707.
TYPE: HAMMER MILL.
MATERIAL: STAINLESS STEEL.
DIMENSIONS: 45 CM. X 23CM. X 36CM. (LENGTH X WIDTH X HEIGHT).
POWER: 1 CV.
POWER SUPPLY: THREE-PHASE 16 AMPERE CETAC TYPE BASE WITH EARTH CONNECTION AT 380 V. (NORMAL) OR 220 V. (UPON REQUEST).
WEIGHT: 24 Kg.
DL-295
PACKING MACHINE BY WEIGHT PLUS
The weight packer DL-295 allows packaging between 0.01 and 10 liters with precision without the need for any adjustment thanks to its anti-drip system and its automatic dosage systems.
More information
*VERSATILITY, because in a few seconds the amount of oil can be varied of olive to be packaged between 0.01 and 10 liters and miniatures, with a resolution of 0.001 liter, so they are widely used for packages of 1 – 2 – 3.785 (1 Gallon) – 5 liters or any other quantity without need to proceed to any adjustment.
*ANTI-DRIP SYSTEMhighly effective in preventing the containers from getting dirty.
*HIGH PRECISIONdue to its dosage system BY WEIGHT</b >which eliminates errors produced by different viscosities and temperatures and to the *AUTOMATIC ADJUSTMENT and continuous that incorporate, because after filling each container, the machine automatically checks the packaged quantity and makes the appropriate corrections if necessary.
Ideal for glass, cans, plastic, ceramics….
MG-707
FAT AND ACIDITY
METER
Autelec MG-707 Fat Wealth Meter, is a highly accurate system, which allows in a few minutes and without weighing or drying the sample, proceed to the real assessment of the olive in reception.
More information
Autelec MG-707 Fat Wealth Meter, is a highly accurate system, which allows in a few minutes and without weighing or drying the sample, thus also avoiding handling errors, proceed to the real assessment of the olive in < span class=”s2″>reception, to know its Performance.
Our equipment, MG_707, despite having been on the market for many years, continues to be the benchmark for measurement equipment, even the newer ones use it as a pattern (because it is one of the most precise and reliable on the current market) to be able to calibrate and check said devices.
TAPPRES
CAPPER
HANDBOOK
An ideal capper for small businesses. Entirely in AISI 304 stainless steel. Ideal for non-refillable DOP caps and for any type of pressure cap. Quick height adjustment system.
More information
An ideal capper for small businesses. Entirely in AISI 304 stainless steel. It can easily cover glass bottles. Ideal for non-refillable DOP caps and for any type of pressure cap. Quick height adjustment system. Easy actuation via pneumatic valve levers. Available kit for PET container.
Production: Up to 400 bottles / hour Approx* -Dimensions: 300 x 300 x 600 mm.
Weight: 10 kg.
Power supply: MANUAL + COMPRESSED AIR 4 Bar.
Bottle height: MIN 100 mm MAX 440 mm.
Cap characteristics: MAX 50 mm diameter.
CP-504/USB
PLANT PRODUCTION CONTROLLER
The control for oil mill CP-504, provides complete information on the production of olive oil of the factory in kilos and liters to know the total of olive oil produced up to that moment.
More information
The control for oil mill CP-504, provides complete information on the production of olive oil from the factory in kilos and litres. In this way, with the Campaign Totalizer, the total amount of olive oil produced up to that moment is known.
With the Partial Counter, which can be reset whenever desired, you can know the olive oil that is introduced in each storage tank, or the amount of olive oil produced by a certain batch of olives.
The instant production, the average and the campaign average, all of them in Kgr/ time, they indicate the proper operation of the oil mill, or if applicable, if the instantaneous flow decreases, to be able to find the cause and adopt solutions. All the data is available through a USB.