The DM-120 packaging machine is a very specific machine for packaging oils and at the same time very versatile, as it allows the use of containers of different capacities (from 0.005 liters to 10 liters, shapes or materials (plastic, glass or cans). The amount to be bottled can be programmed, both in liters or in kilos, in a few seconds, although in any case, the filling control is electronic by weight (by weight), and as one liter of oil weighs 916 grams, regardless of the volume. the temperature at which it is found, very high precision is achieved, impossible to achieve with other systems, without thermostating the oil, the containers and the packaging plant very accurately. Nor does the fact affect the precision. of having different viscosities. As this system checks the quantity actually packaged after each dosage, the microprocessor it incorporates automatically makes corrections in successive packages (the machine learns from its small errors), thus achieving precisions not previously achieved. the date. They incorporate all models of totalizers and partial counters for liters, kilos and containers, so packaging control is absolute. Its exclusive anti-drip system improves precision and avoids the classic problem of dirty containers. Its installation is very simple, as it does not require compressed air or air tanks. It is sufficient to connect it to the single-phase network and join it, by means of a flexible sanitary pipe, to the supply tank. Made entirely of AISI 304 stainless steel. Constant speed, low speed centrifugal pump with stainless steel impeller and quick disassembly. Flow and pipe shut-off solenoid valve according to the law. For all these reasons, they are very suitable for medium or small packers.

The “M-3” mill is designed to grind olives, obtaining a perfect mass for use in the MG-707.

TYPE: HAMMER MILL.

MATERIAL: STAINLESS STEEL.

DIMENSIONS: 45 CM. X 23 CM. X 36 CM. (Length x Width x Height).
POWER: 1 HP.

SUPPLY: CETAC TYPE BASE 16 AMPERES THREE-PHASE WITH EARTHING AT 380 V. (NORMAL) OR 220 V. (ON REQUEST).

WEIGHT: 24 Kgr.

-HIGH PRECISION due to its WEIGHT dosing system, which eliminates errors caused by different viscosities and temperatures and the AUTOMATIC and continuous ADJUSTMENT that they incorporate, since after filling each container, the machine automatically checks the packaged quantity and makes the appropriate corrections in if necessary.

-Highly effective ANTI-DRIP SYSTEM to prevent containers from getting dirty.

-VERSATILITY, since in a few seconds you can vary the amount of oil to be bottled between 0.005 and 10 liters and miniatures, with a resolution of 0.001 liter

– SIMPLICITY OF HANDLING due to its keyboard and display system. A particular access code can be entered, so that except for the person who knows it, no one can change or consult any data.

-EASY INSTALLATION AND MINIMAL SPACE since there is no need for aerial tanks, compressed air, power lines, etc. A single-phase 220 Volt plug (SCHUKO type with ground connection) and a socket to a tank are sufficient.

-HIGH QUALITY due to its stainless steel construction.

-QUICKLY PAYABLE due to its low cost and possibility of benefiting from packaging subsidies and technological improvements.

-TOTAL AND PARTIAL COUNTERS for complete control of packaged liquid. You can consult them whenever you want and reset the partials.

Autelec MG-707 Fat Wealth Meter, is a highly accurate system, which allows in a few minutes and without weighing or drying the sample, thereby also avoiding handling errors, to proceed with the actual assessment of the olive in reception, to know its Performance.

Our equipment, MG_707, despite having been on the market for many years, continues to be the reference for measurement equipment, even The newest ones use it as a standard (because it is one of the most precise and reliable on the current market) to be able to calibrate and check said devices.

The CP-504 oil mill control provides complete information on the production of olive oil from the factory in kilos and liters. In this way, with the Campaign Totalizer, you know the total olive oil produced up to that moment.

With the Partial counter, which can be reset to zero whenever desired, you can know the olive oil that is introduced into each storage tank, or the amount of olive oil produced by a given batch of olives.

The instant production, the average and the campaign average, all of them in Kgr/ time, they indicate the proper functioning of the oil mill, or, where appropriate, if the instantaneous flow decreases, to be able to search for the cause and adopt solutions. All the data is available through a USB.